Ground Recessed Luminaires Light Tester [접지 매립형 등기구 조명 테스터]
접지 매립형 등기구 조명 테스터
Send Inquiry제품소개
고객의 신뢰와 믿음 속에서 성장하는 기업
Lighting Test Equipment
- HOME
- 제품소개
- Lighting Test Equipment
Product Details
Product DetailsProduction introduction:
This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements.
It is used for the ground accessed luminaires static load test and torque test.
This equipment is controlled by PLC electrical system, the whole operation is controlled on the touch screen, all the parameters can be preset on the touch screen, include every selection mode of the kettle, the touch screen with the functions of manual operation, automatic operation and real-time display.
Main technical parameters:
Power supply 380V 50Hz Test object ground accessed luminaires Test static load test and torque test Max. load 20KN
Rubber punch
diameter 50mm, thickness 50mm
Maintain time
5-10s for torque test, 1min for static load test
Station 1 station
Standard IEC 60598-2-13 Clause 13.6.1, 13.6.2
Control Mitsubishi PLC
Display Touch screen
IEC 60598-2-13
13.6.1 Resistance to static load
Luminaires shall withstand the minimum static load according to the manufacturer's instruction. 13.6.2 Resistance too torque and shear loads Luminaires designed to be used in areas where motor vehicles may circulate, carriageways, parking areas, etc. shall withstand the forces exerted by a turning, breaking or accelerating tire.
Test details please reference to standard discription.
Photos
Send Inquiry
Product Details
Production introduction:
This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements.
It is used for the ground accessed luminaires static load test and torque test.
This equipment is controlled by PLC electrical system, the whole operation is controlled on the touch screen, all the parameters can be preset on the touch screen, include every selection mode of the kettle, the touch screen with the functions of manual operation, automatic operation and real-time display.
Main technical parameters:
| Power supply | 380V 50Hz |
| Test object | ground accessed luminaires |
| Test | static load test and torque test |
| Max. load | 20KN |
Rubber punch | diameter 50mm, thickness 50mm |
Maintain time | 5-10s for torque test, 1min for static load test |
| Station | 1 station |
| Standard | IEC 60598-2-13 Clause 13.6.1, 13.6.2 |
| Control | Mitsubishi PLC |
| Display | Touch screen |
IEC 60598-2-13
13.6.1 Resistance to static load
Luminaires shall withstand the minimum static load according to the manufacturer's instruction. 13.6.2 Resistance too torque and shear loads Luminaires designed to be used in areas where motor vehicles may circulate, carriageways, parking areas, etc. shall withstand the forces exerted by a turning, breaking or accelerating tire.
Test details please reference to standard discription.
Photos