Charpy Impact Testing Machine [샤르피 충격 시험기]
샤르피 충격 시험기
Send Inquiry고객의 신뢰와 믿음 속에서 성장하는 기업
샤르피 충격 시험기
Send InquiryThis series of the charpy impact testers are designed and manufactured in accordance with the standard requirement of IS0179-1992 and JB/T8762-1992. This machine is use to determine the Charpy Impact properties of the non-metallic material such as rigid plastics, nylon, glass fiber reinforced plastics, ceramics and so on.
Item | SH-20 | SH-20A | SH-20B | SH-20C |
The release way of controlling | electronic control | electronic control | electronic control | electronic control |
The numerical value displayed | Pointer | Digital display | Pointer | Digital display |
The energy of the pendulum bob( J) | 1, 2,4, 5 | 1, 2,4,5 | 7.5,15,25, 50 | 7.5, 15, 25,50 |
The moment of the pendulum bob (N.M) | 1J PL=0.516, 2J PL=1.031, 4J PL=2.062, 5J PL=2.578 | 1J PL=0.516, 2J PL=1.031, 4J PL=2.062, 5J PL=2.578 | 7.5J PL=3.866 , 15J PL=7.733,25J PL=12.889,50J PL=25.777 | 7.5J PL=3.866 , 15J PL=7.733, 25J PL=12.889, 50J PL=25.777 |
Min seale mark | 1/100 | 1/100 | 1/100 | 1/100 |
Impact speed m/s | 2.9 | 2.9 | 3.8 | 3.8 |
The pre-elevation of the pendulum bob | 160° | 160° | 160° | 160° |
The distance from the pendulum shaft center to the sample center(mm) | 221 | 221 | 380 | 380 |
The fillet radius of the jaw(mm) | 1 | 1 | 1 | 1 |
The angle of the impact blade | 30° | 30° | 30° | 30° |
The fillet radius of the impact blade | 2mm | 2mm | 2mm | 2mm |
The weight of the machine base | It is more than 40 times of the heaviest pendulum bob and it can be adjusted to the horizontal station | It is more than 40 times of the heaviest pendulum bob and it can be adjusted to the horizontal station | It is more than 40 times of the heaviest pendulum bob and it can be adjusted to the horizontal station | It is more than 40 times of the heaviest pendulum bob and it can be adjusted to the horizontal station |
Power supply | 220V/50HZ | 220V/50HZ | 220V/50HZ | 220V/50HZ |
Dimension: 400mmx300mmx700mm, 80kg
The sample type | length C | Width B | Thickness D | Support line distance |
Ⅰ | 80 | 10 | 4 | 60/62 |
Ⅱ | 50 | 6 | 4 | 40 |
Ⅲ | 120 | 15 | 10 | 70 |
Ⅳ | 125 | 13 | 13 | 95 |